閥門材料性能參數（2）
時間：2010-7-16 9:34:18 來源：http://givenewyork.com 作者：三精閥門 閱讀次數：1469| 合金 ALLOY |
ASTM編號 ASTM NO. |
其它合金編號 OTHER ALLOY DESIGNATION |
正常或高化學含量 NORMIAL OR MAX. CHEMICAL COMPOSITION | 正常物理特性 NOMINAL PHYSICAL PROPERTIES | ||||||||||||||||||||
| 鋁 AL |
碳 CARBON C |
鉻 CHROME Cr |
鈷 COBALT Co |
銅 COPPER Cu |
鐵 IRON Fe |
鉛 LEAD Pb |
錳 MANGA- NESE Mn |
鉬 MOLYB- NESE Mo |
鎳 NICKEL Ni |
磷 PHOS P |
硅 SILICON Si |
硫 SULFUR S |
錫 TIN Sn |
鈦 TITAN- IUM Ti |
鎢 TUNG- STEM W |
鋅 ZINC Zn |
抗拉強度 TENSILE STRENGTH Psi |
屈服強度 YIELD STRENGTH Psi |
% 伸張度 ELONGATION |
硬度 HARDENESS | ||||
| 不 銹 鋼 |
鍛304 Wrot 304 |
A-167-304 | UNS-S30400 | 0.08 | 19 | 2 | 9 | 0.045 | 1.0 | 0.03 | 75,000 | 30,000 | 40 | 202 HB | ||||||||||
| 鑄316 Cast 316 |
A-351-CF8M | UNS-S31600 | 0.08 | 20 | 1.5 | 2.5 | 11 | 0.04 | 2.0 | 0.04 | 70,000 | 30,000 | 25 | |||||||||||
| 鑄316 Cast 316 |
A-743-CF16F | 0.16 | 20 | 1.5 | 1.5 | 11 | 0.04 | 2.0 | 0.04 | 70,000 | 30,000 | 30 | ||||||||||||
| 鑄316 Cast 316 |
A-743-CF8M | 0.08 | 20 | 1.5 | 2.5 | 12 | 0.045 | 1.0 | 0.03 | 75,000 | 30,000 | 30 | ||||||||||||
| 鍛316 Wrot 316 |
A-276-316 | UNS-S31600 | 0.08 | 17 | 2 | 12 | 0.045 | 1.0 | 0.03 | 75,000 | 30,000 | 30 | ||||||||||||
| 鑄410 Cast 410 |
A-217-CA-15 | 0.15 | 13 | 1 | 2.5 | 1 | 0.04 | 1.5 | 0.04 | 90,000 | 65,000 | 18 | ||||||||||||
| 鍛410 Froged 410 |
A-182-F6A2 | 0.15 | 13 | 1 | 0.04 | 1.0 | 0.03 | 85,000 | 55,000 | 18 | 200/225 HB | |||||||||||||
| 鍛410 Wrot 410 |
A-276-410 | UNS-S41000 | 0.15 | 13 | 1 | 0.5 | 0.04 | 1.0 | 0.03 | 100,000 | 80,000 | 15 | ||||||||||||
| 鍛416 Wrot 416 |
A-582 | UNS-S41600 | 0.15 | 13 | 1.25 | 0.06 | 1.0 | 0.15 | 114,000 | 95,000 | 17 | 235 HB | ||||||||||||
| 鍛420 Wrot 420 |
A-276-420 | UNS-S42000 | 0.15 | 13 | 1 | 0.04 | 1.0 | 0.03 | 250/450 HB | |||||||||||||||
| 鑄合金20 Cast Alloy 20 |
A-743-CN7M | 0.07 | 20 | 3.5 | 1.5 | 2.5 | 28 | 0.04 | 1.5 | 0.04 | 62,000 | 25,000 | 35 | |||||||||||
| 鍛合金20 Wrot Alloy 20 |
B-473-20C63 | UNS-N08020 | 0.07 | 20 | 3.5 | 2 | 2.5 | 35 | 0.045 | 1.0 | 0.035 | 85,000 | 35,000 | 30 | ||||||||||
| 鍛17-4PH Wrot 17-4PH |
A-564-630 | UNS-S17400 | 0.07 | 16 | 3.5 | 1 | 4 | 0.04 | 1.0 | 0.03 | 115,000 | 75,000 | 18 | 255 HB | ||||||||||
| 鋼 | 鍛造碳鋼 Forged Carbon Steel |
A-105 | 0.35 | 1 | 0.04 | 0.035 | 0.05 | 70,000 | 36,000 | 22 | 187 HB | |||||||||||||
| 鑄造碳鋼 Cast Carbon Steel |
A-216-WCB | 0.3 | 1.1 | 0.04 | 0.6 | 0.045 | 70,000 | 36,000 | 22 | |||||||||||||||
| 1 1/4鑄鉻鉬鋼 1 1/4 Cast Cr. Moly Steel |
A-217-WC6 | 0.2 | 1.2 | 0.7 | 0.55 | 0.04 | 0.06 | 0.045 | ||||||||||||||||
| 鑄鉻鉬鋼 Cast Cr. Moly Steel |
A-217-C5 | 0.2 | 5 | 0.55 | 0.55 | 0.04 | 0.75 | 0.045 | ||||||||||||||||
| 鑄低碳鋼 Cast Low Carbon Steel |
A-352-LCB | 0.3 | 1.0 | 0.04 | 0.6 | 0.045 | 65,000 | 35,000 | 24 | |||||||||||||||
| 鎳 - 低碳鋼 Nickel-Low Carbon Steel |
A-352-LC2 | 0.25 | 0.65 | 2.5 | 0.04 | 0.6 | 0.045 | 70,000 | 40,000 | 24 | ||||||||||||||
| 閥 內 件 鋼 |
B-7合金鋼螺栓 B-7 Alloy Steel Studs |
A-193-B7 | 0.4 | 1 | 0.85 | 0.2 | 0.035 | 0.25 | 0.04 | 125,000 | 105,000 | 16 | ||||||||||||
| 304不銹鋼螺母 304 S.S. Nuts |
A-194-GR8 | 0.08 | 19 | 2 | 9 | 0.045 | 1.0 | 0.03 | 126/300 HB | |||||||||||||||
| 2-H合金鋼螺母 2-H Alloy Steel Nuts |
A-194-2H | 0.4 | 0.04 | 0.05 | 250/300 HB | |||||||||||||||||||
| 普通鋼螺栓 Reg. Steel Bolting |
A-307-Gr. B | 0.2 | 0.45 | 0.04 | 0.05 | 100,000 | 18 | 121/212 HB | ||||||||||||||||
| 鋼螺栓 Steel Bolting |
A-449 | 0.4 | 0.6 | 0.04 | 0.05 | 120,000 | 92,000 | 14 | ||||||||||||||||
| 304不銹鋼螺栓 304 S.S. Bolting |
A-493-304 | UNS-S30400 | 0.08 | 19 | 2 | 9 | 0.045 | 1.0 | 0.03 | 90,000 | ||||||||||||||
| 吊眼螺栓 Eyebolts |
A-489 | 0.48 | 1.0 | 0.04 | 0.25 | 0.05 | 75,000 | 30,000 | 30 | |||||||||||||||
| 密封螺母 Gland Nuts |
A-563-Gr. A | 0.37 | 0.55 | 0.35 | 1.0 | 0.35 | 0.04 | 0.2 | 0.05 | |||||||||||||||
| H/W螺母 H/W Nuts |
A-108-1020 | UNS-G10200 | 0.20 | 0.45 | 0.04 | 0.05 | 120/300 HB | |||||||||||||||||
| 旋啟式螺栓銷 Swing Bolt Pin |
A-108-1212 | UNS-G12120 | 0.13 | 0.85 | 0.10 | 0.20 | ||||||||||||||||||
| 支架軸罩套 Yoke Bushing Caps |
A-108-12L14 | 0.15 | 0.25 | 1.0 | 0.07 | 0.3 | ||||||||||||||||||
| 閥座墊圈底座 Seat Ring Base |
A-519-1026 | 0.25 | 0.75 | 0.04 | 0.05 | 55,000 | 35,000 | 25 | ||||||||||||||||
| H. F. |
（商標材料，如 Stellite 6*, Stoody 6和 Wallex 6.） (Trademark Materials like, Stellite 6*, Stoody 6, and Wallex 6.) |
AWS 5.13 | 1.25 | 29 | 55 | 2.5 | 3 | 5 | 105,000 | 10 | 350 HB | |||||||||||||
| 蒙 乃 爾 |
鑄蒙乃爾 Cast Monel |
QQ-N-288-E | 0.5 | 0.3 | 30 | 3.5 | 1.5 | 60 | 1.5 | 65,000 | 32,500 | 25 | 125/150 HB | |||||||||||
| 鍛蒙乃爾（K-500） Wrought Monel (K-500) |
QQ-N-286-C1B | 3.0 | 0.1 | 24 | ||||||||||||||||||||
下一條：閥門材料性能參數（1）
上一條：閥門材料的溫度極限
